Giller's Saturn 2 Vat Heating System

I designed this system to provide a simple, low-cost heating solution for the Elegoo Saturn 2 that utilizes a common kombucha heating band and temperature controller that are widely available on Amazon and similar retailers. It utilizes a system of guide clips that are custom fit to the Elegoo Saturn 2 resin vat. These guides force the Kombucha band to form fit around the vat, maximizing the surface area contact. This creates an even, efficient heating solution and best of all...doesn't require any permanent modification to your Vat (some individuals dedicate vats to this type of solution and glue their bands on..). None of that is needed now, and you can install or deinstall this solution in a matter of seconds.

With this system, I have successfully printed in a non-temperature controlled environment with temperatures going as low as -2C, and varying throughout the print 7 C. This was done without any additional insulation or modifications to the printer.

Here is what you will need to complete this Heating System:

1 Brew Fermentation band - Amazon Link below:
https://www.amazon.com/dp/B001D6IUB6?psc=1&ref=ppx_yo2ov_dt_b_product_details

1 InkBird ITC-308 Digital Temperature Controller 2 Stage Outlet - Amazon Link below:
https://www.amazon.com/dp/B01HXM5UAC?psc=1&ref=ppx_yo2ov_dt_b_product_details

Then 3D print the included STL files.:
1 Copy of the Heating Band Front - This file is designed to spring out a bit on the front so that when the printer UV cover is installed, it provides pressure to the guide clip and presses the band firmly against the vat.
1 Copy of the Heating Band Rear Probe Mount - You can choose either the labeled or non-labeled version depending on how cute you feel.
1 Copy of the End Cap 1
2 Copies of End Cap 2