January 16, 2023
Description
I made this filament feeder swivel for use with external filament dryers or feed units.. Just print this, assemble with an M10 x 1.5 x 25mm bolt and a M10 x 20mm OD washer on the end. You could also print these too, which I will provide in the files. (if printing on a FLA printer you may have to tap the threads) Don't tighten it too much, that will allow it to swivel. Nylock nuts work best as they will not come loose once you dial it in. Then detach your OEM Kobra or Vyper spool rod and replace it with this.
*** May fit other Anycubic printers. Post up if it fits yours and I will update this post.
*** Note: My part was printed on a Anycubic Photon S. May have to adjust the X & Y to 99%.
*** Print with the square size on the build plate. Do not need any supports.
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
MeisterWerks
