Summary

If there are some vibrations on a rc heli it is helpful to mount the flybarless unit with gel pads. As the gel pads adhesive is not that great (if there is some) I like to mount the unit in between of two pads to have better vibration readings but not a too less mounting.

The size has to be changed to the model used, this one is for a SK720 with metal plate.

You have to use M2.5 screws with a length of 35mm

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>All-metal Mega</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0,2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>35%</p></div></p>                                                    <strong>Filament:</strong> Eryone PETG                Red                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>PETG or other material for outside should be used.</p><p>For other units like Spirit, Vbar, ... the size has to be perhaps changed. This size is for SK720.</p></div>

SK720 (Spirit, Vbar,...) Gel Box

SK720 (Spirit, Vbar,...) Gel Box

Related Models