Set of 7 Open-End Wrenches 4 - 15 mm (spaced 1 mm + 5.5 mm), Fully Functional
UPDATE: I have added a 5.5 mm wrench (for M3)
I had (once again) misplaced my 8 mm wrench, so decided to make a few more...
:-D
I guess the most obvious question will be,
are they functional?
-
Yes, definitely! They work surprisingly well.
No, they are no good for changing the tires on your 4WD but work really well for DIY and all kinds of in-house repairs etc.
FILAMENT
- Use something really strong (PLA in this case is better than e.g. PETG, which may be too flexible). I use this
easy to print Carbon Fiber PETG , which gives a really tough print. Of course the wrenches look even better in
silk silver or bronze PLA, but will likely not be as strong.
PRINTING
Printing is super easy. No supports needed. I use 80% infill and 0.25 mm layers. Printing time for the full set should be somewhere around 3 hrs.
I really hope you like the design and find it useful. If you feel like tipping (thanks in advance),
rather than clicking the "Tip Designer" button, PLEASE donate to people in need. These people will need any help they can get (a lot more than I do)! THANKS!!
HOPE YOU LIKE THEM, AND IF YOU LIKE THEM, PLEASE LIKE THEM. THANKS!
Enjoy and happy printing!
.
PS.: This post may contain affiliate links and I may I get commissions for purchases made through links. You can support me by simply ordering through these links (and it won't cost you any extra).
guppyk
