Ammo box 6.5 Creedmoor: 10, 20 and 50 rounds

Yet another ammo box for 6.5 mm Creedmoor.

Why it's different:

• lightweight and robust
• designed to CIP cartridge specifications
• available in 10, 20, and 50 rounds configurations
• all FDM-printed, no additional parts necessary
• colour-coding possible for different loads or batches of brass
• cartridges (or brass) don't rattle round the box
• bullet tips do not touch/hit the sides of the box during transportation
• if printed in transparent filament, you can tell full cartridges from empty brass (if you collect brass in the same box, as I do).

IMPORTANT! The tolerances are rather specific; before printing, make sure you calibrate your printer for:

• XYZE steps
• flow
  and if it still does not print right
• horizontal expansion
  Ideally, you should be under +/- 0.1 mm tolerance in the horizontal (X, Y) range.

Optimised for printing with 0.4 mm nozzle (0.2 mm layer height, 0.4 line width), and 0.6 nozzle (0.4 mm layer height, 0.6 line width).

Successfully tested with PLA on Creality Ender 3 S1 Pro (0.4 mm nozzle) and Anycubic Kobra Max (0.6 mm nozzle).

True license is WTFPL (no such option available in thingiverse).

Enjoy.