Light clip for Freewrite Traveler

This is new clip molded to fit (slide) from left side of freewrite traveler.
It's for the rechargable light from amazon: Glocusent USB Rechargeable Book Light for Reading in Bed
There are few different lights on amazon that may look similar (maybe they are, maybe not) , this will fit the one that has 3 buttons on the back. The light is good, BTW, no complains there.
So you need to take the metal clip off by removing the two screws and you will need a little longer screws. I suggest any of the numerous junk little things/toys that you are about to throw away - they have nifty tiny screws in them (I never throw anything without removing the screws)
It is designed to glue a little square of craft foam to the back clip (or felt etc to prevent any scratches - that freewrite is expensive)
Push the screw through the clip by heating them with a soldering gun and you may also heat them so they go in the original transparent. plastic , to prevent splitting, in case your screws are thicker.
Because of the weird shape of the lid, the clip is also molded that way so don't be alarmed why it is cooked - it is on purpose.

This is obviously worth doing if you have 3d printer, otherwise just bend the original metal clip, although this new clip really fits very nicely and securely without any pressure on the writer.