Fatman Nuke with Magnetic Nose

This is a remix of khattoum's great Fatman nuke model with a magnetic nose. I also sized each part of his model to 80%.

You will need 8 neodymium magnets measuring .25" in diameter and .06" thick. I used these ones; https://www.microcenter.com/product/455323/master-magnetics-magnets-with-adhesive-back-n-s-25-wide-12-pieces I just removed the adhesive backing. For the nose cone, they are completely contained in the nose. To insert them, I set up a layer pause and put them in before the layer which would cover the holes started.

The nose and upper half are the two I modified. Everything else is the same, just scaled down to 80%. At this scale, the tail is approximately 4.75" square, and it stands around 10.25" high