Kyosho Blizzard Dual-540 2gear Gearbox

Kyosho Blizzard Dual-540 2gear Gearbox

New and very compact design
1 set of all the parts works for left or right side. Genious right.

Im not making instructions for this one, but maybe the old instructions can help. You can find them in this project:
https://www.thingiverse.com/thing:5848374

All the long spacers are the same. I just made 4 files to make it easy to move them into the slicer.

AxleSpacer1 goes behind the 30t pinion to make sure it is a bit of space behind the gear and the gearbox housing, and ye. Its very tight. This might set your patience on a small test. You can disassemble the frames when assembling this to make it easier.

The gears I'm using are hardened steel MOD1 5mm 30t and 11t, so don't think they will ever strip.

Gears needed for one side:
1pcs 11t
1pcs 30t

Screws needed for one side:

• For the housing
  8pcs CS M3x10-12mm (very important these are countersunk)
• For the AxleOutput
  2pcs CS M3x16mm (important these are countersunk)
• For the motor
  2pcs SH/FH M3x12mm

Bearings needed for one side
1pcs 5x10x4
2pcs 5x11x4

Resources:
Gears: All are MOD1 5mm and bought from https://www.aliexpress.com/item/1005001858396688.html?spm=a2g0o.order_list.order_list_main.41.7e4b1802uMONL1

If you’re using 3.175mm motor axle you need a 3.175mm to 5mm adapter
https://www.aliexpress.com/item/1005003745412191.html?spm=a2g0o.order_list.order_list_main.34.7e4b1802uMONL1