Amiga DB23 video connector

The connector accepts wires with JST XH female connectors. I printed my connector at 0.1 mm layer height. It can be difficult to print it correctly so that it accepts the JST connectors and they lock in place. If you are having trouble, you should be able to glue them in place instead.

The JST connector holes are a little small, so once the wires are inserted into the connector, poke a pin into them and expand them so they easily fit over a DB connector pin. You can test using a spare DB25 pin connector.

I glued the connector to the backshell and used two 3mm screws to put it together.

When inserting onto the amiga, do not use too much force, because you might damage the amiga pins. Keep expanding the holes until they fit easily onto the amiga.