Galaxy Tab s7fe wall mount

This is a wall mount for a Samsung Galaxy s7fe 12.4 tablet. I printed it in "landscape" position because in "portrait" position the nozzle hits the bed glass clamps. reduce the skirt to 5mm so it will fit properly on the Ender-5 plus. as you can see, the concentric line mode does not work well, zig zag lines seemed to work best. I used the following outlet box and used the trim ring as the mechanism to attach the tablet mount base to the wall: "Arlington DVFR1W-1 Recessed Electrical/Outlet Mounting Box, Single Gang". I used the following outlet, which has the USB-C receptacle incorporated: "Leviton T5633-W 15-Amp Type A & Type-C USB Charger/Tamper Resistant Outlet, White". And I used the following USB-C cable to plug into the tablet while its on the wall: "USB C Cable, UMECORE 6FT 90 Degree Right Angle USB to 180 Degree Type C Fast Charging Flat Cable for Samsung Galaxy S21 S21+ S20 FE S10 S9 LG G9 G8 G7 V60 V50 V40, Pixel 5 4 3 XL, MOTO G Motorola Edge". All from Amazon. The cover just snaps on and can be removed using the printed in reliefs on the base and a small screw driver. I included the step file, its large as there are many references in it. feel free to remix as you see fit.