February 28, 2023
Description
PSU Mount for Wasatch Pixels Advanced Eight Controller.
There are 2 versions available.
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Spacers are designed to fit into the hole on the top of the mount. Your printer tolerance will have to be dialed in, or it may not fi.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
8x - M3 - 12mm bolts/nuts (secure controller to mount)
Links:
Advanced Eigght Controller - https://wasatchpixels.com/product/advanced-eight-controller/
MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina
MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232
License:
Creative Commons - Attribution - Non-Commercial
derikwhittaker
