Nuki 3.0 smart lock spacer to Qfort

Nuki 3.0 Qfort Spacer Design remixed by: https://www.thingiverse.com/thing:5032280

I made some changes to the spacer:

Waxed the holes for fixing to the door on the original holes and added the holes with m4 nuts to further fix the Nuki A plate using M4 countersunk screws with a length of 9.90 mm and thickness changed to 6.40 mm.

I then had to center the lock upwards by 1mm on the spacer because nuki was off-centre and lower than v2.0

My drawing for Qfort knob adapter: https://www.thingiverse.com/thing:5895732

I also leave you the fusion 360 files to make changes