Sea Serpent 2

APRIL 11 UPDATE:

New file uploaded, head is its own segment now. FOR BEST RESULTS: Set wall thickness to 3mm. This will strengthen the posts and make the connections better.

---

APRIL 8 UPDATE!

First, a hearty thank you to everyone who's downloaded this model.

Second, NEW STL file! This addresses the problems some people have had with parts staying locked after printing. I have printed it in several sizes and silk and regular PLA and ABS and the PLA works fine, although (and maybe this is just my ABS settings) the ABS needs a bit of "encouragement" to unlock in some places.

For best results, print without any bed adhesion except perhaps hairspray. A brim is a pain to get off, and not needed.

Fully articulated sea serpent. Please consider leaving a tip so this crazy old bat can keep buying filament and designing new coolness!