Low profile case for serial TTL camera (PTC08)

Tip: Pin headers in place of screws on the TTL camera board make for a more breadboard-friendly design. If omitted, the case will have flush backside capable of being mounted on any flat surface.

Tip: If the camera wobbles inside the case, gently wedge some foam or similar behind the camera before closing the case (pieces of heat-shrink shown).

Tip: When making/choosing a printing profile, opt for something that will give you strong layer adhesion. This will ensure longer lasting snaps that wont break off with excessive use.

How to:
http://youtu.be/WV3Xx-1UDlQ

Camera module:
https://www.adafruit.com/product/397