The model of a Belgian steam locomotive in HO scale (1:87) , built in the early 1900s, it was used as a shunting locomotive in many industries. Similar versions of this locomotive have also been used on touristic train lines in Belgium.
This model was deisgned with FDM printing in mind but you might have better results with an SLA printer. If printed on an FDM printer, you will need a 0.25mm nozzle (or finer) and layer heights of 0.05mm.
You will need to print :
- 2x SteamShunter_Wheel1_R (the 2 outer wheels)
- 1x SteamShunter_Wheel2_R (the wheel in the center)
- 2x SteamShunter_Wheel1_L (the 2 outter wheels)
- 1x SteamShunter_Wheel2_L (the wheel in the center)
- 1x SteamShunter_bottom_R (the 2 outer wheels)
- 1x SteamShunter_bottom_L
- 1x SteamShunter_cabin (requires supports)
- 1x SteamShunter_cabRoof (requires supports on built plate)
- 1x SteamShunter_boiler (requires supports on built plate + brim)
- 1x SteamShunter_alignmentBlock
- 4x SteamShunter_buffer
- 2x SteamShunter_holdingLinkage
- 1x SteamShunter_mainLinkage_L
- 1x SteamShunter_mainLinkage_R
- 1x SteamShunter_driveLinkage_L
- 1x SteamShunter_driveLinkage_R
- 1x SteamShunter_cylinderInner_L
- 1x SteamShunter_cylinderInner_R
- 1x SteamShunter_cylinderOuter_L
- 1x SteamShunter_cylinderOuter_R
- 1x SteamShunter_frontHandle
- 2x SteamShunter_Valve
S6mont
