ThnuderBolt

几年前的项目，原本设计是有七成的动作还原但是一个人实在是能力有限所以干脆就做个简单版的发出来吧。

实物图是基于简易版和完整版之间的，简易版阉割了旋转机构（少了一个轴承），至于一些细节和零件图片可能之后会再补上来吧

由于枪很大所以用的不锈钢棒棒作为支称，需要这么几个规格：
5mm500mm 两根
5mm550mm 两根
4mm550mm 两根
4mm*250mm 两根
我为了保证松紧度所以打印出来的零件会很难安装，这边建议拿电钻夹着不锈钢棒扭进去

皮卡汀尼导轨和两脚架需要较大的打印密度来保证强度，皮轨用的M4平头倒边内六角螺丝，之后的两脚架和瞄准镜用的M3、长度在30mm+的螺丝

瞄准镜已上传，瞄准镜整体镂空是因为之前设计有电子瞄准的功能，但因为预算问题没能实现，有能力的可以尝试一下。。。

如果你喜欢我的作品，你可以在booth或者cults3d上，支持我一下，以便帮助我更好的去制作新的模型（购买耗材和零配件）

This project was started several years ago. The original design was to restore 70% of the action but due to one person’s limited ability, a simple version was made and released.

The physical map is based on a simplified version and a complete version, with the simplified version having its rotating mechanism (one bearing less). Some details and parts pictures may be added later.

Due to the size of the gun, stainless steel rods are used as supports. You will need several specifications:
5mm500mm 2 pieces
5mm550mm 2 pieces
4mm550mm 2 pieces
4mm250mm 2 pieces

In order to ensure tightness, the printed parts will be difficult to install. It is recommended to use an electric drill to clamp the stainless steel rod and twist it in.

Picatini rails and bipods require a high print density to ensure strength，The Picatini rail uses M4 flat head inverted hexagon screws, and the bipod and sight use M3 screws with a length of more than 30mm .

The sight has been uploaded. The overall hollowing out of the sight is because the function of electronic aiming was designed before, but it could not be realized due to budget problems. If you are capable, you can try it.

If you like my work, you can support me on booth or cults3d, so as to help me make new models better (purchase consumables and spare parts)