March 28, 2023
Description
###Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
###Custom display base are also available from $5! Contact me to discuss what you want!
###If you like my work, consider support me through Patreon: https://www.patreon.com/gigapenguin3dprints/posts
The display is based on Initial D tofu shop. Since there aren't any detailed photos/screenshot of the shop, I based the design on multiple different Intiail D media, the Cada Brick Tofu Shop set, clips from the anime and some from the manga.
The display base is separated into multiple parts for easy printing and colour swap. All files are packed into a zip files and arranged in folder as follow:
###1) Base Folder
###2) House Folder, below are the details in each subfolders:
###2a) Walls
###2b) Floor & Interior Walls
###2c) Initial D Roof & Signs
###2d) Door & Frames
###2e) Alternate Roof & Sign (Optional)
###3) Interior Prop (Optional):
###4) Exterior Prop (Optional):
Nozzle size = 0.3 mm (0.4 will be printable and smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "ShopSignDetails - Emperor Penguin Tofu.STL":
Nozzle size = 0.5 mm (0.4 will be printable and smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "Roof.STL":
Filament change layer for colours on "FlatBase.STL":
The car is just placed on top of the display.
Check out my assembly video to give you a better idea on how the build suppose to go: https://youtu.be/FOUDgsap1z4
###Step 1: Base Build
Print the following base and flat base:
The flat base should fit nicely on top of the base, aligned it so that the base support for the base can still be seen. It is recommended to use tape or glue to hold it in place, the outside wall can be glue now too.
###Step 2: House Build
There are multiple subfolders in the "House" folder, start with the "walls" folders first.
Print the following walls:
The general shape of the house can be build with these parts printed. Slide the walls into the gap provided at the flat base and base to make sure it fits. DO NOT GLUE THE WALLS AT THIS POINT!
"BrickFront.STL" is a simple piece with some brick like details to fit into the gap provided under the main window at the front walls.
Install all the window frames and door frames to the walls. All the files can be found at "Door & Frames" subfolder.
Print the following parts:
All window and door fram should fit nicely to the gaps provided, if it falls off too easily use glue or tape to hold it in place.
Next is print the interior walls and floor, the parts can be found at "Floor & Interior Floors" folder.
Print the following parts:
Remove one of the side walls then slide the "ground floor - floor" into the house and make sure it fits into the building. Put the side wall back then place the "Outside Floor" at the main door. "Ground Floor Walls" will fit into the groove provided on the flat base then place the "Upstairs Floor - Floor Only" on top of the walls and "Door Area" supports. "Upstairs Floor - Walls" will be place on top of the up stairs floor.
###Step 3: Roof & Shop Sign Build
There are 2 variant of roofs and shop signs provided. One is fictional penguin theme and the other is based on Initial D. Pick whichever you prefer.
Print the following roof parts for Initial D roofs:
Alternate Roof & Sign:
Both roof variant will fit nicely on to the top of the building. The roof will slightly overlap the windows, this is by design.
For the Initial D roof, it is split in 2. First is the main roof, "Roof.STL" and the second is the front detail "Roof - Front.STL". The front detail will need to be glue on separately.
For the Initial D shop sign, print "ShopSign.STL" then print the PDF file provided on a A4 paper. Cut the sign on the paper then glue on the roof.
The alternate roof is 2 separate 3D print, use the layer change details above to get correct colours.
###Step 4: Exterior & Interior Props (Optional)
All the exterior and interior props are optional. The parts found in both folder are simple shelf, table, ladder, barrel and a electric pole. Print them put them wherever it fits best for you.
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/
####Custom display base designs are available from $5! Contact me to discuss what you want!
License:
Creative Commons - Attribution - Non-Commercial
GigaPenguin3DPrinting
