Airsoft Blaster Conversion Parts Assortment

A collection of previously uploaded parts that when paired with the V-11 stock options, are a great start to any custom Airsoft Blaster build! The handguards are intended to use a M5x25 set screw for retention, the E-10 version can use a M5x30 as well.

There are 3 versions of the T Tracks- Thin, which snaps over if using PLA+ or PETG, Thin with Tab, which has a tab to prevent it from sliding back and forth, and Thick which is a bit larger and for big nozzles or a beefier look. If you need a longer version of the Thin with Tab style, drop a comment and I can make it, otherwise just make them longer or shorter with your slicer.

The picatinny rail fillers- glue these in place and then you can fill and sand over them to create a smooth surface.

Print at least 5 of them at a time to allow for enough cooling between layers, I recommend 10 or more. Printed out of PLA at 210c. Make sure the bed is cool before removing them or you will warp the bottom and they won't fit properly.

For a whole range of custom fit Airsoft blaster conversion kits, check out https://dtblasterworks.com/ and to get involved in the Star Wars Reenacting community, visit https://www.galactic-civil-war.com/