March 30, 2023
Description
This is just a qick design for my Raspberry Pi 4B
The screws of the fans are a little bit too long. If you have shorter ones, I would prefer these.
Link to the Fans. I cutted the wires and soldered them to a USB port. But if you prefer to use the GPIO pins feel free to use them.
https://www.amazon.de/gp/product/B095WJL5TF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
For the mounting I used 3x40 SPAX screws at a deskplate with a height of 20mm.
The minimum height of the case is 26mm. so you will need screws of a minimum length of 30mm.
Feel free to edit the Solid edge Files. If you need some changes, write a comment and I maybe edit it for you.
(Originally the bottom part was used for a 11" Display holder, so there are still sinks, but they do not really disturb the mounting)
License:
Creative Commons - Attribution
PrinTopic
