March 30, 2023
Description
Should 'mostly' print as is with a FDM printer. The LED size guide is there too as a test print. This lamp can be aimed up at the ceiling or placed on the tires.
Required materials:
4x 5mm LEDs
4x 3mm LEDs
2-8x Resistors (identical LEDs can share a resistor)
Roll of wire
USB cable
Soldering equipment; (iron, paste and solder)
Glue to attach tires and bottom cover
5mm and 3mm LEDs are used, solder together with resistors and add a USB cable.
This was the first test print, it came loose printing, looks kinda crappy, but at the same time works as intended.
License:
Creative Commons - Attribution
derben
