15mm WW1/WW2 village/church ruins- 20 different buildings

There were plenty of damaged/ruined houses on thingiverse, but I wanted terrain to represent the total wreck of a French village in WW1. So I took some damaged houses, made them 15mm scale, and added rubble. Sized to hold one or two FoW bases.
4/15/23- repaired some holes in ruins-01
4/16/23- Added roof tiles for the other side of ruins-02. Added a few mm of height to ground floor of ruins-06. Fixed a hole in ruins-03.
4/17/23- Added the bakery (ruins-07).
4/18/23- Added the church (ruins-10).
4/19/23- The bakery (07) was a bit too large. Scaled it so the door is 20mm tall.
4/22/23- Added butcher shop (09).
5/28/23- Fixed a hole in 10-p2. I think.
6/2/23- Added ruins-12 and https://www.thingiverse.com/thing:6058962
6/18/23- Added ruins-13
6/23/23- repaired ruins-13
8/27/23- uploaded new 12 and 13 that will fit a FoW stand. Added 6C- basically 6 that doesn't look as much like 2 and 10.
10/23/23- uploaded 15 and 16 and https://www.thingiverse.com/thing:6266679
10/30/23- uploaded 17
11/02/23- uploaded 18
12/02/23- uploaded 4 and modified 16 by removing some of the floor on the 2nd floor. I couldn't fit an infantry stand in it without the change- the floor was in the way.
12/03/23- uploaded 11
12/08/23- uploaded 14. 12/09/23- Uploaded better version of 14-p4.
12/19/23- uploaded (minor) improvements for 1st and 2nd floor of 15.
01/10/24- uploaded 19 and 20. Maybe I'm done now.
03/20/24- Added garden walls- various sizes and damages. You should be able to scale all the pieces in the slicer to fit any of the houses. You can also join the walls to the houses in the slicer and print the walls and first floor as one piece. Just load the ones you want, scale the walls and gates to fit, and place them properly.
01/09/26- Found that I could not fit a standing unit (20mm total height) inside ruins_11. I fixed the model and uploaded the new version. The roof was not changed, so only parts 1 and 2 would need to be printed again. It may be that you only need to reprint part 1.