54 mm tamper for Bialetti Duo

A simple coffee tamper in 54mm for made for use on my Bialetti Mocha kettle.(This leaves about 1 mm for a bit of wiggle space...)

This was made as a small project while learning Fusion 360, and is my first project uploaded here at Thingiverse.

Instead of making it too skinny, I decided on leaving it a bit meaty for better durability and strength. So far this has worked well for my daily morning caffeine fix... :-)

Rotate the tamper with the flat side down in your slicer. (Not sure why it ended up sideways here, it is not in Fusion). No supports required.

Have a nice morning mocha coffee!