Ender 3 S1/Pro/Plus NeXigo N960E Camera Mount

This is a camera mount for the NeXigo N960E 1080p webcam, which works on the Ender S1 line of Creality printers. There are two mounting styles, one mounts to the top of the x-axis tensioner and the other secures from the side of the x-axis tensioner. The 'long' version extends the camera by 2" over the standard versions.

Take time-lapse videos by adding a post-processing script (Insert at layer change) and input TIMELAPSE_TAKE_FRAME. This will take an image between each layer and has a park head option to move the hotend out of the way. Manual and Autofocus are adjustable through Klipper or Creality Sonic Pad. The N960E has an integrated ring light which keeps AI detection more accurate and avoids Low-Ambient light warnings.

Installation(No additional hardware required):

1. Remove rubber padding on the folding laptop mount that comes with the N960E
2. Remove the 4 small screws underneath the rubber pad to access the camera mount screw.
3. Unscrew the single camera mount screw and retain the original mounting flange.
4. Snap in the original mounting flange into the new 3d printed camera mount and fasten the camera to the top.