Enclosure for ePaper with support.
Remix from https://www.thingiverse.com/gchart
Thanks to Gabriel for the very nice ePaper enclosure.
for the top of the enclosure and other things see : https://www.thingiverse.com/thing:4055993
So, here is my contribution :
As I was needing a support I have embedded one in the bottom part of the enclosure that is printed directly along with the print of the enclosure.
ePaper board model I used :
DollaTek T5 V2.3 Wireless Bluetooth ESP32 Ink Screen Development Board
(but it is same like TTGO for the size and pin holes)
Battery : Lithium LiPo Battery 800 mAh 3.7 V 1S PCB 653040 JST PH 2.0 mm 7
From experience the support is relatively strong. No issue so far. It can also be hooked using the support itself (sure this could be improved).
For information:
Used to display data from my Anemometer :
Link : https://www.thingiverse.com/thing:5190383
Data are extracted from my intranet web site. I parse them and display directly (almost)
Autonomie (that I was looking for) is around 30-40 days with a reading every 5min during day and 10min during nigth.
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
reymopa
