MOTU: Clash For Eternia All-In Organizer

This organizer for Masters of the Universe: Clash for Eternia stores everything from the Kickstarter All-In (with the exception of 3D Castle Grayskull and neoprene mat) in the Core box and Box of Power. Designed for cards sleeved in 60 micron Sleeve Kings, anything thicker might fit but would be tight.

Here is what you will need to print:

Core Box: Stores all Character cards, dice, regular minions, 3d Terrain, Cards and tokens not designed to fit in the Box of Power. Ruins sit upside down along the bottom, rulebooks and cardboard map (if needed) would fit on top. Cardboard overlays would also fit loose on top but would add clutter and slow down set-up so are not recommended.

1 x Core Boulders.stl - Holds the 3D Boulders and Objective markers
1 x Core Forest.stl - Holds the Lake with all the Forest overlays in a 5 layer stack (see pictures) with a tray for the removable plants.
1 x Core Dice.stl - Holds the dice, strange shape helps to stop the Ruins from shifting. Alternately, the boulders and objectives can fit here snugly and dice can go in the boulder box if you have an excessive number of them.
1 x Core Minions1.stl - Holds Skelecons, Hover Robots, 3D Grayskull objects and Shield tokens and the Grayskull cardboard door.
1 x Core Minions2.stl - Both sets of mini clones
1 x Core Minions3.stl - Holds Randor's Guards, Eternian Guards and Brightmoon Archers.
1 x Core Minions4.stl - Horde Troopers and Snake Men
1 x Core Rocks.stl - 2 layer stack of 3D rocks, some need to be upside down for a proper fit
1 x Core Plastic Trays.stl - Holds the 2 plastic trays from the Box of Power, one for power cubes, the other for the Core Status.stl
1 x Core SmCards.stl - Holds non-character specific mini cards (Any Player order card, Strategy cards)
1 x Core MedCards.stl - Holds regular sized cards divided into 5 sections. Recommend AI cards in the middle section which is slightly larger.
2 x Core LargeCards.stl - Holds the extra large player cards, intended to be split between AI and non-AI cards
1 x Core Tokens.stl - Holds the non-character specific tokens with several dividers.
1 x Core Status.stl - Fits inside a plastic tray splitting it into 4 sections for the 4 types of status tokens, escalation tracking sword fits on top.
Optional Core PowerCube.stl - Splits the plastic tray in two to divide power cubes

Box of Power: Stores all playable character models organized with their mini cards, hp tokens and character specific terrain tokens and elite minions, all NPCs and Mounts, Carnivorous Plants, character and controller dashboards

4 x BoP 4Fig.stl - Main storage for figures, each box stores 8 characters head to head with their cards in between.
3 x BoP 3Fig.stl - Stores 6 figures and 2 stacks of terrain tokens each.
1 x BoP Bulky.stl - Stores models too big for the standard files - Scorpia, Grizzlor, Scareglow, Whiplash, Rattlor & Fangor
1 x Fistos.stl - Stores the Fistos. Open side faces Rex as his head spills over a bit.
1 x He-Skel.stl - Stores He-Man and Skeletor with their mounted versions. He-Man on Battlecat goes in at an angle head first and then He-Man alone faces down or they won't fit (see picture)
1 x TeeBeast.stl - Stores Teela with her guards and Beast Man with his Shadow Beasts
1 x Weaver.stl - Stores Shadow Weaver with her wraiths and cage tokens. Beside her is a spot for Two Bad to fit the extra mini cards and the last slot is for either King Hiss or Sorceress as it only holds one hp token and card set.
1 x She-Dak.stl - Stores She-Ra and Hordak with their mounted versions, Swiftwind and Mantisaur mounts and all 5 NPCs. See picture for where they all go.
1 x Rex.stl - Stores Tyrantisaurus Rex, Battle Cat, Panthor and 5 regular figures. Also stores a selection of regular cards. I did Mounts, NPCs, Elite minions and Minions. The regular minion cards could probably be swapped with Terrain cards since the regular minions didn't make it into this box. The single figure slot was designed with Flutterina in mind but any tall figure should work.
1 x Plants.stl - Open box that stores the 3D Carnivorous Plants and their 2D tokens
1 of Option1.stl or Option2.stl - This currently just fills empty space. Option1 is an open box, theoretically it could store HP tokens in coin capsules as these would not fit the regular organizer. I have no idea how many would fit. Option2 stores 3 more figures with extra wide spaces. There are already 3 open character slots in the organizer so this would bring that up to 6 which could be used for custom figures. It can also be used for favourite characters as it sits right up top or for characters that feel a bit crowded in a standard slot (ex. He-Ro).

Rex file is also available split into 2 parts for easier printing on certain machines.