Xootr Cruz Clip-on Kickstand

Having had A Xootr for a decade, I finally got inspired and designed a simple kickstand for it. I searched around for existing designs, but I couldn't find anything that fit. There were a few using springs and screwed to other types of scooters, but nothing that works for my Xootr Ultra Cruz.

So, after taking a few measurements, I cameup with a simple clipon kickstand, using 4 printable parts and an m4 screw and nut. I chose a clip to avoid drilling holes in the deck.
At some point, I may revise the base to use screws instead of the clip base, but the clip works well enough. Friction keeps the stand leg/foot folded or extended.

The clip is designed to firmly grip the 12.7mm deck. Overtime, the clip may lose tension, but I haven't had a problem so far. The foot is available in 2 types, one is a peg leg, the other has a bent end, which makes it easier to kick the foot up or down.

Print list

Base
Foot
2 Core (left and right axis to secure the foot)

Use a 20mm M4 screw and Nut to lock the cores in place after threaded through the base and foot/leg.