Pip-Boy 3000 Mark IV (Easy Print)

Source from https://ytec3d.com/pip-boy-3000-mark-iv-assembly/
115 version

Ytec的模型非常好，细节非常完善，但就是零件太多，组装比较困难，打印要分太多件。
尤其是几个铰链和卡扣，我的机器打印出来效果非常差。并且由于ABS的收缩变形，很难进行组装。
于是我按照Ytec 115（最大的版本）的轮廓，重新做了一个比较粗糙的版本。除了一些按钮，只需要打印两部分，而且只需要少量支撑。

Ytec's model is very good with perfect details, but there are too many parts, assembly is difficult, and printing takes too many pieces.

A few hinges and clasps in particular, my machine prints very poorly. Moreover, it is difficult to assemble ABS because of its shrinkage and deformation.

So I re-created a rough version using the outline of Ytec 115 (the largest version). Except for a few buttons, only two parts need to be printed, and only a little support is required.