Summary

I used this seal driver with great success installing the fork seals on my Honda VFR400 NC21. Not the best printing though but it was function over form. I think it was because of 0.3mm layers and the wider side was up instead of down. Designed it 39mm ID and 47mm OD as the seal is 37mm x 49mm. Light-ish taps with a small hammer on the wider end drove the seal into place.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Prusa Clone</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3 layer, 0.4 nozzle</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> SA Filament PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>4 perimeters</p></div>

Honda VFR400 NC21 / NC24 Fork Seal Driver

Honda VFR400 NC21 / NC24 Fork Seal Driver

Related Models