Print Nozzle Spinning Top

Here is a spinning top. Just print it and add a print nozzle under it. Also, screw 8 nozzle on the side of it to add weight and shift the center of gravity.

It has a pretty good feel to it. Body is 7.5g (print it at 20% infill) and each nozzle is 2g which bring the total theoretical weight to 25.5g

I was able to spin it for 50s (I didn't pass the 1 minute mark).

This object was made in Tinkercad. Edit it online
https://www.tinkercad.com/things/jASNb0BMn4c