Ender 3 (Pro) with Mean Well UHP-350-24

Modification to install a Mean Well UHP-350-24 power supply in an Ender 3 (Pro).

The following is also needed:

TC-10088380 IEC connector (https://www.voelkner.de/products/5950891/TRU-COMPONENTS-TC-10088380-IEC-connector-connector-installation-vertical-total-poles-2-10A-black-1pc.html),
1EA XT60 chassis socket (https://www.amazon.de/dp/B09DX9HGXN?psc=1&ref=ppx_yo2ov_dt_b_product_details),
2ea XT30 socket,
4ea sliding blocks and screws,
8ea M3 melting thread and M3 screws,
4ea M3 screws and nuts to attach the power supply,
various fork cable lugs and Quick coupling socket Vinyl fully insulated,
shrink tubing,

The XT60 socket is screwed, the XT30 must be glued.

4 more feet are required, otherwise the power supply will not fit under the Y carrier

Printed with 0.6mm nozzle in PLA+, feet in TPU.

Update 23.05.2023:

I modified the lids.
Now they go over the power adapter and you can glue in a mesh grid, I used epoxy for this.
the lids are marked with V2, but those without a mesh insert remain available