Recurve Limb Gauge - Updated

Update: It is possible to adjust for the width of the limb now. That way these can be used on the outer part of the limb. Also there is a (smaller) second triangle on the upper side (away from the riser).

I also added 3 STL version: 25-29mm / 31-34mm / 39-40mm

A customizable limb gauge for limb alignment for recurve bows.

Measure the width and thickness of the limb at a lower point. Then measure the thickness 30mm above that point (see sketch). Hack in these three numbers and the template should fit your limb nicely.