Filament_Tube_fitting_adapter (30degrees)

This is an adapter for attaching filament tube fittings. Only one 10mm hole is needed in the box. The adapter has a structure through which the filament tube passes.
The screw type is PT1/8-28. The angle is 30 degrees.

It can be used when making your own dry box for filament. Just drill a 10mm diameter hole in the dry box and fix the fitting with this adapter and nut.

print conditions]
-printing type: FDM
-printer: Original Prusa i3 MKS
-filament: PETG
-support: yes
-brim: no
-raft: doesn't matter
-infill: 20%
-shell: 10 --- This is recommended to ensure strength !!!!
-nozzle diameter: 0.4mm
-layer height: 0.2mm
-print directions: Please refer to the photo.