Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 1

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 2

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 3

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 4

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 5

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 6

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 7

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 8

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 9

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 10

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 11

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Image 12

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 1

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 2

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 3

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 4

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 5

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 6

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 7

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 8

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 9

Filament_Tube_fitting_adapter (stopping tube type) 3D Printer File Thumbnail 10

Filament_Tube_fitting_adapter (stopping tube type)

asimomagic

June 2, 2023

Description Comments Tags

Description

This is an adapter for attaching filament tube fittings. Only one 10mm hole is needed in the box. The filament tube does not pass through the adapter and stays inside.
The filament insertion opening is about 8 mm, so it is easy to insert the filament from inside the box.

The screw type is PT1/8-28.
Three types of tube angles are available. Zero (straight), 30 degrees, and 45 degrees.

It can be used when making your own dry box for filament. Just drill a 10mm diameter hole in the dry box and fix the fitting with this adapter and nut.

print conditions]
-printing type: FDM
-printer: Original Prusa i3 MKS
-filament: PETG
-support: yes
-brim: no
-raft: doesn't matter
-infill: 20%
-shell: 10 --- This is recommended to ensure strength !!!!
-nozzle diameter: 0.4mm
-layer height: 0.2mm
-print directions: Please refer to the photo.

License:

Creative Commons - Attribution - Share Alike