Spring Style Shock for "The Angry Hornet"

This is an alternative front landing shock designed by RonStG to fit "The Angry Hornet", instead of using rubber bands it uses a single extension spring in the front.

Hardware needed for this build are:
3x 3mmx25mm screws
3x 3mm nylon lock nuts
1x spring 0.25in diameter x0.75 length x.031 diameter wire (McMaster-Carr #7749N084)
1x 3/16in x .0144in ID x 12 inch aluminum tube, cut to 14mm long (M-Carr #8978K112)

Print settings .2mm layer height,.4mm walls, 2 walls, 25% grid infill 4 tops, 4 bottoms