Frank the Bunny Version-3 Mask from Donnie Darko - 2001 Film

First, a huge thank you and appreciation to Dale R. Brady, the artist responsible for creating the original Donnie Darko movie Frank masks. His work is fantastic and I hope I did him justice with my recreation of such a fan favorite.

VERSION 3 IS HERE! This is a much more detailed sculpt with variations included and officially replaces my previous versions (both have been removed). There are 3 versions of this file included here, so please pay attention to which one you choose to print. Also, I have not printed any of these yet, so proceed carefully. I admit, I have no idea what the best way to slice them is because of the large size, but I'll update accordingly if I figure something out. The new versions included here are as follows:

VERSION 3.1 - A full size mask with holes for eyes, nose, and mouth. I designed it to be 2mm thick because i was concerned about warping if I made it any thinner. This is a limited visibility mask! I put the eye holes where the original mask had them, but I can't imagine it will be easy to see out of. It probably won't be very comfortable either, so you might want to glue foam inside to fit your face correctly. MEASURE BEFORE YOU PRINT TO MAKE SURE IT WILL FIT YOUR FACE! I made this about the same size as other unrelated Halloween masks I have, but you'll have to measure it to fit yourself, which is why I'm including...

VERSION 3.2 - A full size mask with NO PRE-MADE HOLES! NO VISIBILITY! If the holes I made don't work for your face, you can modify this mask and make your own holes, or just make a full size display piece. Just double check to make sure you are printing the right version (holes or no holes).

VERSION 3.3 - A small bonus version. I just sized it to 100mm tall, but it's a solid sculpt with a flat back. This is NOT A MASK! You can make other crafts with it like fridge magnets, jewelry or similar, but it would probably need to be scaled smaller some more.