August 14, 2023
Description
a small fidget that makes a satisfying click sound
update: you can see its big brother at https://www.thingiverse.com/thing:6179732
print in pla, 0.2mm, standard 0.2 cura settings for pla + activate print thin walls option because spring lines are 0.35 mm wide (my printer has a 0.4 noozle)
prints fast: 50 min!
sound:
note: after some hundred clicks, one of the spring blades will break. Then the ‘click’ will be gone. keep fiddling it and after some times one of the blades will break on the other side. Then the click will come back (with less pushback force, and a higher tone).
Unfortunately it will eventually stop working after many clicks.
License:
Creative Commons - Attribution - Non-Commercial