September 6, 2023
Description
simple holder for action cam, electronic spirit level etc.
tiltable 40 degrees with clamp
required is a 1/4 - 20 UNC x 7/8 inch countersunk screw (length 22.23 mm)
a 2nd variant has a M6 thread. this thread does not fit exactly but can be used. screw in carefully and only 2 threads. required is a M6 x 20mm countersunk screw.
the holder works with PLA
prints with 3 wall lines and max.0.2 layer height
License:
Creative Commons - Attribution - Non-Commercial
hallo_ralph
