S.S. Drake Model Kit

A 3D-printed recreation of the ship that Alph, Brittany and Charlie used in their explorations of the Pikmin homeworld.

The antenna is designed to be used with a length of 1mm-thick metal rod. The 50% versions of the antenna components are scaled so that a rod of the same diameter will fit them if you want to print the entire thing at 50% scale.

The radar dish's angle can be adjusted, the antenna can be retracted by removing the metal rod, the hull and lower flaps can rotate, the windows can be removed, the legs can be fully articulated, and the interior can include a diorama.

If you want one of your own, you can get it here: https://thearchitectmouse.etsy.com/listing/1571930305

Color Guide:

Primary color (exterior): Alclad White Primer
Primary color (interior): Model Air Light Gray
Secondary color: Model Air Gray
Control panels: Model Air Light Sea Blue
Control panel details: Model Color White or similar
Orange highlights: Tamiya Orange
Red highlights: Model Color Flat Red
Green highlights: Tamiya Light Green
Yellow highlights: Model Color Golden Yellow
Black highlights: Tamiya Black or similar
Metallic joints: Tamiya Gunmetal
Window tint if printing transparent: Alclad Transparent Smoke
Panel lining: Tamiya Panel Line Accent Color Black

Updates

9.29.23: Revised certain parts to prevent the legs from overextending under too much weight.
10.18.23: Revised radar arm and radar dish to make the joint less likely to break.
10.24.23: Revised bottom hull to fit better into the engine block.
11.2.23: Revised bottom hull and interior to fit better together.
7.15.25: Added logo stamp.