Lunchbox/Midnight Pumpkin 2-in-1 COMBO body mounts - TPU

Big thank you to the originators of the files i remixed from!

So these are body mounts that fit BOTH Lunchbox and Midnight Pumpkin shells.

I printed them in TPU 95A which is a flexible filament and allows for some flex in case of bumps but also to turn the mounts on the screws holding them to the chassi, allowing for switching which body is to be used.

As the parts are flexible they can be rotated without loosening the screws to switch between Lunchbox and Pumpkin modes.

Mine are mounted using the standard screws and m3 12mm bolt and nuts for attaching the pumpkin body posts.

I made these because i have both body shells but only one chassi in stock form (bar the bearing, gearbox brace, extended battery mount bar and some extra space hogged out to fit a square 5.2ah 2s lipo), the other having been heavily modified into a poor mans monster beetle.

Mirror the two bottom parts to get the opposite sides.
The bottom part with a square on its top, above the lunchbox peg is the rear one.
The shorter pumpkin post is the rear.