Trapped - A Creepy Halloween Lithograph

This is an easy to print model, but is quite visually striking. Prompted from Stable Diffusion, and lithophaned in HueForge, it seems to come alive with a creepy, disturbing life of it's own.

200x200mm with a modular frame. Should scale a bit in x&y but the 'pixel' resolution is 0.4mm, so much smaller and it will loose clarity on a 0.4mm nozzle.

Print laying flat, 0.4mm nozzle, print the first layer at 0.16mm then 0.08mm for the rest.

The 4.2mm thick one is shown here and is optimal for this Sunlu PLA with a transmission distance for HueForge of 3.4, but there is a thinner one at 3mm if your filament is more resistive to light passing through or your light source is dimmer.