Quadraxis V2 - Metroid Prime 2

This is a new version of my old Quadraxis figure made in 2020, it's much larger and faithful to the original boss. In keeping with the spirit of the previous version, I modeled every part myself, this time using the gamecube files as a base reference to keep every part proportional to its original counterpart (some vertices are an exact match, but 99% of the geometry is new). Also decided to reutilize the ankle articulation from the Samus figure, and repurpose it as the joint for every leg.

The entire figure is hollow to house the LED strips, the wires and the controller boxes, I used the electronics that come with the regular strips, but there is plenty space inside the head for an arduino board.

The assembly it's held together with a combination of pegs and 3/16" (M5) screws of various lenghts, these are as follows:

SIX 2 1/2" (60mm) for the knees and body
TWELVE 1" (25mm) for the hip joints and leg 1
TWO 1 1/2" (40mm) for the body
ONE 2" (50mm) for the head

This fella occupies roughly half a cubic meter of space, keep that in mind if you ever decide to make one for yourself, that being said, it should be possible to scale it down to a more reasonable size, but know that the pegs for the transparent pieces will not work anymore because they are already very small, glue will be require to join these.

Files with a G in the title are groups of pieces, including both regular and mirrored parts, the x will indicate how many times that group needs to be printed. All parts and groups have been made to fit in a 200x200 bed, any missing group is due to the combined size being larger than this (leg 3, for example).
The head comes with both right and left halves, the body and leg halves are all for the left side, these pieces must be duplicated and mirrored in the slicer.

Most pieces are black or dark grey, with other colors specified in the name.

View the PDF for assembly instructions.