Virtua Racing Sega Model Race Car (Improved)

by Segasonicfan Designs
https://segasonicfan.wixsite.com/retro

@SegasonicfanDesigns on youtube:
https://www.youtube.com/@SegasonicfanDesigns

If you use this model, please give at least a heart - it makes me happy!

--
I decided to take @MAD_ALIEN's cool design to the finish line! This model can be completely assembled into a standing set piece, with new models for axles, stand, and pluggable tail piece!

Improvements yet to be made:

• Design tailpipes closer to bed to print without supports?
• Make tail piece plug a little larger or use screws
• Make axles a little thicker? Or print with PETG 100%

Everything works and looks great though, these are just some nitpicks. The anxles are very fragile, so thats something to be aware of.

Everything printed on Ender 3 Pro.
White PLA Overture brand used

I used all M2 countersunk wood screws except for the base, which IIRC is an M3 screw.

Print axles very slow (see pic for slicer settings), everything else it pretty much your basic PLA settings

Keep wheels at 10% infill or less so they arent too heavy on the axles.

Note that on my bed / slicer the skirt intersected with the very front of the model. Not sure why (probably my bed too small) but Id avoid that if ya can. Or be carefully trimming it off since it is ultra thin single layer.

The base is in Overture clear PETG and will probably yield better results with 100% infill (more transparent)

Came out nice still though! :) Enjoy!