Dwarf ll Telescope Adapter

I made a 28mm filter adapter for the Dwarf 2 Telescope. It uses four 5mm magnets from Amazon. The hole is slightly undersized for the lens so that I can use the lens itself to cut the threads. I used a dab of glue in each magnet hole to hold the magnets. The left two magnets are polarized differently from the right two magnets inside the Dwarf 2 Telescope. Its probably best to place the adapter in position with the lens pointing towards zenith. Drop each magnet near its hole and let it flip to correct polarity. Then glue in position.

I didn't want to risk any damage to the Dwarf 2 so there is a little tang that will pop the adapter off during homing/calibration.