HobbyStar Hex / Nut Driver Set Pegboard Wall Mount

This is a pegboard or wall mount for HobbyStar style hex drivers and nut drivers. They are designed to use the attached pegboard rivets for 1/4" (.25) sized holes and spaced for standard 1" pegboard. They can also be used with standard screws as well.

Rivets should be printed in the horizontal orientation with the cut side towards the bed as this significantly increases the strength of the rivets by preventing layer lines at its flex point. It is recommended to use a couple of brim perimeters when printing the rivets due to the minimal profile in contact with the surface.