NANO-ITX NAS

Small and beaty NAS case, on stx-n39, may be modified for other 120*120mm motherboard. Source in zip, step or f3d.

Sata data cables for 3.5" dual 90 degrees x3 10cm lenght, for 2.5" x2 15cm lenght one side 90 degrees.

WD Purple is so hot, i am installing 4010 dual ball bearing 12v fan, and connect to gpio power 5v, silent and best work.

Print 0.4 nozzle 3 perimetre 15-20% infill.

PETG for HDD case:
R_HDD_BOX.stl
L_HDD_BOX.stl
MB_box_up.stl
2x FR_HDD_box.stl

PLA:
MB_box_down.stl
MB_box_up.stl
Cover.stl in VASE mode with 0.6 line width or 0.6 nozzle(i am rotate before save stl)

TPU:
pin.stl - (optional to print)
Pad.stl

Screws:
6-32 UNC x10 for case only, and x12-18 for mount 3.5"HDD
M3-5mm x8 for 2.5"HDD
M3-30mm x4 for motherboard mount

Build:
https://youtu.be/SsRe_8jcS2w

Components:
Sata controller ASMedia ASM1064: https://aliexpress.ru/item/1005005579829095.html
SFF 8482 SAS-SATA for easy connect hdd: https://aliexpress.ru/item/1005005887709851.html
Sata power 0 degre: https://aliexpress.ru/item/1005008825623232.html
Sata power 180 degree: https://aliexpress.ru/item/1005005038572152.html
sata 90 to sata 90 10cm to ASMedia ASM1064: https://aliexpress.ru/item/1005006140818802.html
On motherboard sata connect UP 90, or 0 degree some fine.
UPD: add Denoize PAD_V2, i am print from TPU 75А 20% gyro infill, 4 line wall.