B+ Pi Cam Ultimaker 2 timelapse harness

The assumption is that you already have a Raspberry Pi Model B+, the Pi Camera module of your choice, any extension cable and the capture software for taking the images etc.

This thing is a modular harness that will attach and support the Pi and the camera module onto the front or side of an Ultimaker 2. The camera can be moved into any position and rotates as well so it can look down on your print, or hanging underneath look directly at your print, front face on, or from a corner.

It should also be noted that the focal length of the PI Cam module is about 45cm. For this reason you'll probably want to hotglue a +2.0 reading glass lens over the front of the module to get this back in the region of 20-25cm... where this camera actually sits from the center of the build plate.