Sidewinder X2 Z-Stabilizer Fullsize

See my improved model here: https://www.printables.com/de/model/961036-z-axis-stabiliser-for-sidewinder-x2

Full printable z axis stabilizer. Perfect fit for Artillery Sidewinder X2

You need:

• Right Side
  • Right Top, Right Bottom, Middle, Clamp Top, Right Clamp Bottom
• Left Side
  • Left Top, Left Bottom, Middle, Clamp Top, Left Clamp Bottom

Installing

Start with top and bottom parts to install. Especially the top part is tricky. Make sure you grab the top bracket at the top and top-back at the same time, then click it on.

The middle part is provided in different Sizes. The Calculated variant is 197mm. Start printing it. If z is not rectangular to y, print one of the shorter or longer versions. Add the clamps at the end, these are not very easy to remove.

If you have trouble, be sure to remove "elephant foot first".

I printed with 30% Infill + PLA and (for faster Printing) a 0.6mm Nozzle.

Have fun.

I would be very happy to see your makes of that!
And feel free to comment.

Like it?