Japanese lamp WLED

Hi! This is my versio for WLED firmware ( https://kno.wled.ge/ ).
Original lamp: https://www.thingiverse.com/thing:1534342
Items required:

1. Address RGB Strip (WS2812B) I use 60led\m. You can use any, but i recomend minimum is 60
2. Wemos D1 mini ( or anyone else, supporting by WLED) https://ali.onl/2eJU
3. PD\QC Trigger https://ali.onl/2eJW
4. Wires ( I use silicone 26 AWG) https://ali.onl/2eJT
5. double sided tape 3mm width ( I use "3M" tape for phone`s displays width 3mm and thickness 0.15mm)
6. Glue. Superglue or something seemed like Cosmo CA-500.200 or any glue for PLA. I use dichloroethane with PLA (If you don't know what it is, don't try it. Use the above, because its very dangerous)
7. Transparent tape
   Optional:
8. Sensor touch TTP223 https://ali.onl/2eJV
9. Microphone Max4466 (not work with esp8266, only esp32) https://ali.onl/2eJX
10. Logic level switcher (look manual WLED)
11. Resistors (look manual WLED)
12. Broke led monitor for matte light diffuser. Or I don’t know where else you can get one like this.
13. White A4 papper. I'll explain later why this is necessary
14. M2x6 screw https://ali.onl/2eLA