Screwdriver drawer organizer for Harbor Freight US General 22" Tool Box

I really liked the simple design of the organizer by Hexapuma, but I didn't like the dimensions, because I couldn't fit an even number of them in my toolbox drawer. So I designed my own based on the design I already liked (I'm kind of a newb, and not sure if it's technically a remix if I started over from scratch without using their file? but regardless I really liked the simple design, and wanted to give credit!).

• My US General 72x22 toolbox drawers are 19.5" deep.
• I made 2 versions of these screwdriver holders, one with 10 slots, and the other with 8. Both are the same outside dimensions
• Obviously the 10 slot version is tighter. If you have mostly "normal" or smaller handles, this one is fine. If you have larger handles, you'll want the 8 slot version.
• It takes 3 of these to fill the length of my toolbox.
• You can mix and match 8/10 slot versions.
• The dimensions are all listed in the attached screenshots (in mm)
• There's also a photo of the 8 and 10 slot version side by side with each other.

I used PLA, 20% infill, which seems fine so far.