QS8 Male Connector Mount For Arrma Limitless V2

Description
2-Piece solution for a QS8 Male connector mount for the Arrma Limitless V2.
I made this for my custom built Arrma Limitless V2.
It might fit other Arrma vehicles that share the same chassis.

The Reference Setup:
Limitless V2 Chassis
Mamba Monster X 8s ESC
Mamba Monster X 8s ESC mount for Limitless V2

Hardware Needed:
Qty. 3 M3 x 10mm button head screws
Qty. 3 M3 brass inserts
Qty. 1 QS8 Male Connector
xx" of 10 awg silicone insulated stranded wire
Shrink tubing

Notes
Use the screw at the ESC try shown in the picture to secure the QS8 mount.
You will need to back out the screws on the bottom of the chassis that hold the ESC tray in place until you insert the QS8 mount. Once the screw for the QS8 mount is secure then tighten the ESC tray screws.